How To Remove Steering Arm. How to replace steering knuckle spindle with bearing & hub assembly on rear wheel drive cars The thing with those washers is that they're not just held in by the pressure against the side of the hole in the steering arm. You should be able to remove the Pitman by pulling down on the centerlink and slipping it out.
Control arm replacement and suspension removal VW Passat Audi A4 A6 from www.myturbodiesel.com
I clamped the vice grips on and screwed it right off We just did one a couple months ago that we had to use a chisel at the area where the arm mounts to the top of the knuckle.
Control arm replacement and suspension removal VW Passat Audi A4 A6
I took the drag link off the pitman arm, and then used a block of wood between the pitman arm and frame to make sure I didn't put any additional strain on the steering box inner components while undoing the nut holding the pitman arm onto the steering box. If you're not too worried about the steering arm, wail at it from the top and bottom Remove the cotter pin, then remove the nut holding the centerlink in place
How To Remove Steering Knuckle Bolts at Cleo Mitchell blog. After you remove the nut, time to pull out the pick fork and BFH I hit down on the steering arm about 5 times about halfway between the third stud and the drag link end, and the middle washer popped right up
1981 chevy 4x4 k10 steering arm removal YouTube. I clamped the vice grips on and screwed it right off How to remove steering arm off Squarebody easy way